Replacement hard plastic slide in fin for the inflatable line of BOTE paddle boards.
These Rac adaptors/receivers make it possible to use the BOTE Rac Systems with our Rac Compatible inflatable boards. Simply screw these into the receiver plates on your Rac Compatible inflatable board and it's ready for the water.
Keep your cooler securely attached to your board (compatible models only) and your paddle secure and within arms reach. The cooler tie-down straps allow you to utilize a cooler while on the water without fear of it toppling overboard. Easily mount the paddle clip to the side of the cooler for convenient paddle storage. The BOTE Cooler Kit makes a day on the water even more enjoyable while giving you piece of mind.
20oz MAGNETumbler With Lid
The patent-pending MAGNETumbler is a magnetic 20oz stainless steel insulated tumbler with lid that keeps drinks hot or cold for hours. Magnetic bottom provides a way to secure the tumbler to your MAGNEPOD compatible watercraft without the risk of it tipping or falling over while paddling.
Safety meets functionality and comfort – our 10’ coiled leash will perform to the highest standard in any conditions, featuring a key pocket and padded velcro ankle clasp.
BOTE Board innovators have found the missing link in the new patent pending Travelink™ Carry System. The Travelink™ System was designed to get you to your paddling spot more easily, comfortably and without 'dead arm' syndrome. By simply clicking in the Travelink™ adjustable carry strap to the latch points in the rail of the board, you remove all weight from your hands and carry the board more safely and ergonomically with your shoulders and back. After a few sand dune climbs and gusts of wind, you'll wonder how you ever carried your SUP without Travelink™.
Dimensions: 47″ L × 4″ W Weight: 0.9 LBS Capacity: 330 LBS
32oz MAGNETumbler With Lid
Whether you need to keep your morning brew hot for that sunrise paddle or your iced beverage cold for a midday sun excursion, this tumbler will get the job done. Like the entire MAGNEPOD™ compatible drinkware line, the 32oz MAGNETumbler has a built-in magnet at the bottom, keeping your drink safe and secure while out on the water.
Big enough for a whole day of paddling and relaxing on the water, while keeping drinks ice cold or piping hot depending on your beverage of choice. Like the entire MAGNEPOD™ compatible drinkware line, the 36oz MAGNEBottle has a built-in magnet at the bottom, keeping your drink safe and secure while out on the water.
The BOTE Board Sox provides protection from the sun. Slip it on for the car ride or while boards are on the beach after a race, paddle or surf session. Constructed from Heavy Duty Anti-UV 4-Way Stretch Material, the sox will stretch to fit boards from 10.5' to 14'. Secure it to your board with the cinching drawstring. Also included is the Board Sox carrying bag, the bag rolls up and fits nicely away. The bag also doubles as a paddle blade cover.
Mustang Survival Minimalist Inflatable Belt Pack
Ideal for inshore activities that might take you in and out of calm waters (by choice or not), this small package is a supportive safety net when you need it. With 18.9 LBS of buoyancy when inflated, the ‘Minimalist’ namesake means wearing it around your waist without interfering with your SUP strokes...or your tan lines while still keeping you safe. Smaller design also affords greater ease in repacking after inflated. Soft exterior fabric (the same as what’s used in highly sought-after Khimera™) amps up comfort, with wings to prevent rubbing from the webbing strap. Daisy chain webbing on the wings let you clip your gear on and keep it handy.
Approval: Harmonized Level 70 - USA and Canada (Meets minimum life vest buoyancy of 15.7 LBS)
Manually inflates by pulling activation cord
Provides 18.9 LBS of buoyancy when inflated
Stays out of the way until activated
Molle webbing to carry essentials
Lightweight ergonomic fit
AERO Paddle SUP Seat
A simple product with a big impact. Now you can transform any Travelink™ compatible BOTE stand-up paddle board into a sit-down paddle vessel with the addition of our all-new patent-pending Aero SUP Paddle Seat.
Use the included tie-down straps to secure the seat to the Travelink attachment points or cooler tie-down points on your board, and you’ll be able to use your SUP in a whole new way. For those who love to SUP but have been eyeing a kayak, want to be able to sit for added stability while you’ve got a kid or dog on your board, or those who just want to take a load off, the SUP Aero Paddle Seat is a game-changer.
The Aero SUP Paddle Seat is reverse-compatible with all existing Travelink- and KULA-compatible boards. Already have a BOTE board? Add this seat for a completely new experience on the water.
One (1) Aero SUP Paddle Seat
One (1) Pair of Cooler Tie-Down Straps
One (1) Aero Repair Kit
Dimensions:24.8″ L × 18″ W × 9.15″ D
Avg. Weight:7 LBS
Construction:Inflatable AeroULTRA Technology
Optimal Inflation:7-10 PSI
Travel Bag Dimensions:29″ L × 14″ W × 14″ D
Loaded Bag Weight:10 LBS
Mustang Survival KHIMERA™ Dual Flotation PFD
You already choose your own adventures. Now, choose your own buoyancy in the Khimera™. Offering the security of foam in a slim profile, the option to boost your buoyancy with the pull of a cord keeps your movements (and your flotation) as fluid and dynamic as your waterlife activities. Wide arm slots and a minimal silhouette allow you to keep your mobility at a high so your center of gravity stays low - getting back in your boat with ease. Soft and durable material stands up to your adventures, yet won’t chafe or rub. Simple deflation system makes transitioning between buoyancies a breeze. Adjustable shoulder and waist straps create a custom fit; attachment points and front pocket allow you to bring everything you need for a successful expedition like an extra C02 cylinder (sold separately).
Approval: Harmonized Level 70 - USA and Canada (Meets minimum buoyancy of 15.7 LBS)
20.5 LBS total dual buoyancy (7.5 LBS foam buoyancy, 13 LBS additional buoyancy when cells inflated)
Dual flotation system blends the security of foam flotation with the slim profile of inflation technology
Easy re-arm - just squeeze air out of the inflation cell, add new CO2 cylinder and you're done
Lightweight and low profile design offers greater comfort and range of motion, and eases re-entry into your boat from the water
Adjustable shoulder and waist straps create a close-to-body fit
Bright reflective shoulder patches for visibility
Front storage pocket and slot to hold extra CO2 cylinder (extra cylinder not included)
Front shoulder attachment point
Perfect for airports, surf breaks, and paddle excursions, the Highwater Duffel is a 100% waterproof-submersible piece of luggage. The Duffel uses a 100% nylon seam-welded construction with double-sided TPU coating and fully waterproof TZIP® main zipper to protect all your belongings from the outside world. The spacious 39L interior also features a side mesh organizer pocket to keep your smaller items separate and easy to locate. Exterior pocketing includes a convenient non-waterproof stretch stash pocket for additional storage. For easy hauling, this bag offers two side grab handles, a removable padded shoulder strap, and a top handle for horizontal carrying. To round things out, the Duffel has a 3D embossed, compression molded bottom panel for structure and protection.
Dimensions: 20″ W × 11″ H × 13.5″ D Weight: 2.6 LBS Capacity: 39 L
KULA 2.5 Cooler
The KULA 2.5 set the standard for cool and just when you thought round couldn’t get much cooler, we tapped it. 9 months later, the KULA 2.5 was born. This baby may be half the size, but it packs a whole lotta punch...hunch punch that is. Press the button to dispense! Lightweight, easy to carry and holds ice till the cows come home – The 2.5 is there when you’re in need of some cool. Why this KULA?...Cause it’s gotta tap!
Inner Dimensions: 9.5″ W × 9.125″ H Outer Dimensions: 14.875″ W × 12.25″ H Weight: 11 LBS Volume: 2.5 GAL
BOTE’s original innovation, the Tackle Rac, slides into any Tackle Rac compatible board in less than five seconds and instantly transforms your BOTE into the ultimate fishing and adventure board. Weighing in at just 4 pounds, the fully welded, marine grade aluminum Tackle Rac is the perfect companion for your next fishing trip, day on the water, or expedition. Get one today to accompany your Tackle Rac compatible BOTE board.
Dimensions: 15″ W × 35″ H × 2.5″ D Weight: 4 LBS Rod Holders: 4.5″ Circumference
KULA Softy 2.5
This 840 Denier, Double TPU coated ripstop fabric of the KULA Softys will give even a gator a run for its money in the tough department. It's on the smaller side, but it still gets the job done. Perfect for a day tripper or a little afternoon delight-but still keeps your brew ice cold for hours on end.
Inner Dimensions: 9″ W × 9.5″ H Outer Dimensions: 11.25″ W × 12.75″ H Weight: 3 LBS Volume: 2.5 GAL
KULA Softy 5
Well, we’ve made it easier with the KULA Softy series. Yep, it’s still round... but now constructed with a watertight, heavy-duty softshell filled with badass insulation. With a watertight zipper, you can sling it around and it won’t leak a drop. It might be soft, but it's anything but inadequate. This bad boy holds enough cold ones to keep the party going... all night long.
Inner Dimensions: 12.75″ W × 11.5″ H Outer Dimensions: 15.25″ W × 14.5″ H Weight: 4.5 LBS Volume: 5 GAL
Padded Board Bag
Our BOTE Board Bag is the perfect way to protect your board. With two zippers, handle, shoulder strap, and reflective backing, your board will be protected from all of the elements!
APEX Pedal Drive + Rudder System
The APEX Pedal Drive is a hands-free, pedal-powered system. The APEX has a 10:1 gear ratio for smooth, efficient pedaling as well as wide pedal foot platform with comfortable straps, a clear viewing port-hole, no-touch forward and reverse, and a spring-loaded, kick-up rudder to prevent damage. Apex Pedal drive is compatible with Lono Aero and the new Rackham 12'4 Aero!
One (1)APEX Pedal Drive
One (1)Steering Rudder System
One (1)3″ Removable Aero Center Fin
One (1)Tool Kit
Included Items In Tool Kit:
One (1) Propeller Shear Pin
Five (5) Allen Wrenches (sizes: 3mm, 4mm, 5mm, 6mm, 8mm)